Fuji Spray Gun Comparison

Fuji has 3 different spray guns that are available with the Mini Mite and Q systems: They are the T-70, the T-75G and the Gxpc.

1) The T-70 is a pressurized bottom feed spray gun that comes with a quart cup. There is also available a Mini-3  Cup system for the T-70. The Mini-3 Cup system consists on 3-8oz plastic cups with lids and an assembly for attaching the cups to the bottom of the spray gun. The T-70 as configured can not spray upward except for a short period of time, with the pickup tube turned towards the back of the cup it can spray upward for a longer period of time. In order to spray upward without any problems you can use a PPS system or a pressure pot.
There are 7 air cap setups available for the T70 ranging from 0.8mm (#1) to the 2.5mm (#7). The spray gun comes standard with the #3 (1.3mm) setup installed, any other setup can be installed and ordered as a special order.

2) The T75G is a pressurized top feed or "gravity" spray gun. It comes standard with a 600cc (22.5 oz) cup and there are also 3oz, 400cc (14.5oz), and 1000cc (34oz) available as accessories. The T75G can only spray upwards for a short period of time. Use a PPS system or pressure pot to spray a ceiling or any large area upward.
There are 7 air cap setups available for the T75G ranging from 0.8mm (#1) to the 2.5mm (#7). The spray gun comes standard with the #3 (1.3mm) setup installed, any other setup can be installed and ordered as a special order.

3) The Gxpc is a very popular pressurized "gravity" spray gun that has a side mounted  400cc (14.5oz) cup that can rotate allowing the spray gun to spray upwards with ease. There is a 3oz cup available for it and I have a swivel fitting that will allow you to attach the bottom feed 32oz cup to the Gxpc, the 32oz cup will also rotate allowing you to spray upwards with it. Also the Mini-3 cup set and a pressure pot will work with the swivel attachment on the Gxpc. There are 5 air cap setups available for the Gxpc ranging from 0.7mm (#2) to the 2.2mm (#6).
The spray gun comes standard with the #4 (1.4mm) setup installed, any other setup can be installed and ordered as a special order.